Our Most Durable All Metal Liquid Level Fill Gauge
The Gfk gauge is a lower profile fill gauge with an all metal top construction for maximum durability. Internal wetted components consist of Galvanized Steel Rods, HDPE Floats, and an Aluminum Bushing. Due to a different joint configuration, this gauge is only available from 8" depths to 48" depths.
- A tough performer for use in tanks with depths from 8" to 48".
- Please specify tank depth and size when ordering.
- Indestructible cast aluminum housing.
- Available in 1 5/16", 1 1/2", and 2" openings.
- Repair parts available.
- Indestructible cast aluminum housing.
GFK Gauge Overview
What it is
Top mounted liquid level gauge that can measure the level of smaller tanks. Comes in any size from 8 inches to 48 inches. The all metal construction makes the GFK one of the most durable gauges on the market.
Additional Options - Not Included
Multiple mounting options for this fill gauge shown below include.
- CRS 1 5/16" weld on flange
- Aluminum 1 5/16" bolt on flange
- Pass Thru fitting option (no tank fitting required)
Instructions for Operation
- Unthread the aluminum locking nut. Separate the aluminum bushing from the rest of the gauge. (make note of where all your gaskets go.)
- Thread the male bushing into the female fitting on the top of your tank.
- Drop gauge through the center of the aluminum bushing float first. Be sure your gaskets are still in all the proper locations.
- Be sure your swing arm is pointing to an open spot in the tank, avoiding walls, corners, baffles or other obstructions.
- Tighten your aluminum locking nut and calibration down to the aluminum bushing.